Comparing glass infrared panels? Choose a glass finish that suits your interior while assessing output, mounting and controls. A glass front does not determine the required wattage or suitability for a bathroom. This collection helps you choose between glass finishes; for other materials, see all infrared panels.
Have your glass panel choice checked
Glass finish, size and location
Compare colour, gloss or satin finish with the intended position. Check dimensions and weight too: a suitable appearance does not mean the wall or ceiling can support the panel. Maintain the required clearances and keep furniture or curtains from obstructing the radiant heat.
Looking for a surface you can use as a mirror? Choose an infrared mirror. An ordinary glass heating panel has a different finish. For another appearance, compare metal panels.
Two glass models: different sizes and controls
- Termofol TF-GB700: black glass, 700 W, 50 × 120 cm and 13 kg according to the product specifications. This model is for wall mounting and has a built-in thermostat with Wi-Fi and app control.
- Ecaros satin black glass 600 W: 60 × 90 × 2.2 cm and 13.5 kg according to the product specifications. It is listed for wall and ceiling mounting and requires suitable external controls.
These examples are not a ranking of consumption or savings. Compare a complete solution: panel, required controls, receiver and mounting parts. Follow the product link for the current version and supplied components. Different outputs do not mean both models can heat the same room.
Glass ceiling mounting needs a specific check
Not every glass panel may be ceiling-mounted. Use a model approved by the manufacturer for this position, with the specified fixings and any additional glass retention parts. For example, the Welltherm manual for the relevant glass panel series requires glass holders for ceiling mounting. Do not apply that instruction automatically to another brand: follow the manual for your exact model.
Have the supporting structure, weight, fixings and electrical connection assessed together. See the ceiling panel guide for positioning above seating or workspaces. To add light in the same position, compare panels with LED lighting separately; lighting frames are not universally interchangeable.
Assessing output and consumption
Local supplementary heating depends on the seating position, the reach of radiant heat and usage time. Heating the entire room also depends on heat loss, insulation, glazing, ventilation and desired temperature. A fixed range such as 500 to 900 W therefore cannot serve as advice for every average-sized room.
Calculate consumption using kW × active hours. A 700 W panel heating continuously for two hours uses 0.7 × 2 = 1.4 kWh. At a fictional rate of €0.30/kWh, that costs €0.42. Actual running time and your own tariff determine the cost. Glass does not guarantee lower consumption than metal; controls and usage matter too.
Bathrooms, condensation and care
Check each product's IP rating, permitted mounting position and connection method. An IP rating does not make a panel suitable for every bathroom zone. A heated glass surface also does not guarantee that condensation or damp problems disappear; ventilation and room conditions remain relevant.
The surface can become hot. Follow the operating and cleaning instructions, switch the panel off and let it cool before cleaning. Do not use a damaged glass panel. Heating is not a treatment for allergies or asthma.
What information helps with your advice request?
Note room dimensions, ceiling height, insulation, windows and usage times. Explain whether you want to heat one spot or the whole room. Add photos of the mounting position and specify your preferred glass finish and controls. Request heating advice to have output, layout and accessories assessed together.